Description
PT mount-ready and remote temperature monitoring
Overview
- 360° endless pan and 135° tilt with AXIS T99A11 Positioning Unit
- Temperature alarm zones
- Isothermal palettes
- Spot temperature reading
Under specific conditions, some Axis thermal cameras are capable of precise temperature measurements, but they are not designed by Axis for the specific intention of human fever detection nor the diagnosis, mitigation or prevention of disease or health conditions. Thus, Axis thermal cameras are, for example, not approved by FDA in the US for this use.
Temperature Detection
AXIS Q2901-E PT Mount offers two kinds of alarms triggered by a deviation of the temperature: if the temperature goes above or below a set limit, or if the temperature increases too rapidly. The camera can detect the temperature of an object between-40 °C to 550 °C (-40 °F to 1022 °F). The accuracy is +- 5 ° in temperatures below 150 °C (302 °F). The accuracy is +- 5 ° in temperatures below 150 °C (302 °F). To reach an unobstructed field of view (360°) and a ground-to-sky view of 135°, you can mount the PT mount thermal camera on AXIS T99A11 Positioning Unit.
Isothermal Palettes
Isothermal imaging makes it possible to configure highlighted temperature-spans in the image. They help to define which temperature corresponds to which color. The Lower limit denotes the temperature where the colored part of the palette will start and all temperatures above this limit will stand out.
Spot Temperature Reading
This capability is used to view the temperature of a particular area of the image. The emissivity can also be adjusted (depending on the material characteristics) to get a more precise reading. Used as a visual aid for an operator.
For a list of emissivity for different material.
The following table lists approximated emissivity values for a number of common material types.
| Asphalt |
0.93 |
| Charcoal |
0.96 |
| Cloth |
0.95 |
| Concrete |
0.94 |
| Foodstuff |
0.80-0.90 |
| Graphite |
0.97 |
| Metal oxide paints (value may vary depending on paint types) |
0.90-0.96 |
| Metals (unoxidized) |
< 0.10 |
| Oil paint (value may vary depending on paint types) |
0.92-0.96 |
| Plastics (value may vary depending on surface finish and paint types) |
0.92-0.95 |
| Porcelain (glazed) |
0.92 |
| Rubber (hard) |
0.94 |
| Rubber (soft) |
0.86 |
| Skin (human) |
0.98 |
| Soil |
0.93 |
| Tape |
0.95-0.97 |
| Tar paper |
0.93 |
| Textiles |
0.94 |
| Wood (value may vary depending on wood type, finish etc.) |
0.90-0.95 |
AXIS Q2901-E PT Mount Temperature Alarm Camera
PT mount-ready and remote temperature monitoring
The outdoor-ready, bullet-style AXIS Q2901-E PT Mount delivers thermal imaging in 336×256 resolution. Mounted on a
pan-tilt motor, the camera can cover larger areas. AXIS Q2901-E PT Mount supports up to six temperature alarm zones
that can be used to trigger an alarm. It offers two kinds of alarms triggered by a deviation of the temperature: if the
temperature goes beyond a set limit, or if it increases too rapidly. The spot temperature functionality is used to view the
temperature of a particular area. Isothermal palettes highlight temperature-spans in the image, visualizing hot spots
to identify overheated equipment or areas.
AXIS Q2901-E PT Mount Temperature Alarm Camera
Models AXIS Q2901-E PT Mount 9 mm
AXIS Q2901-E PT Mount 19 mm
Camera
Image sensor Uncooled Micro bolometer 336×256 pixels, Pixel size 17 µm,
Spectral range: 8-14 µm
Lens 9 mm: F 1.25, horizontal field of view: 35°, min. focus distance:
2.1 m (78.7 in)
19 mm: F 1.25, horizontal field of view: 17° view, min. focus
distance: 9.5 m (354.3 in)
Detection range The size of a monitored object is recommended to cover at least
10×10 pixels in 336×256.
Sensitivity NETD < 50 mK
Thermography
Object
temperature
range
-40 °C to 550 °C (-40 °F to 1022 °F)
Temperature
accuracy
Below 100 °C (212 °F): +/- 5 °C (+/-9 °F) accuracy
Below 150 °C (302 °F): +/- 5% accuracy
Above 150 °C (302 °F): +/- 20% accuracy
Video
Video
compression
H.264 (MPEG-4 Part 10/AVC) Main and Baseline Profile
Motion JPEG
Resolution Sensor is 336×256. Image can be scaled up to 720×576
Frame rate Up to 8.3 fps
Video streaming 3 individual streams
a
in H.264 and Motion JPEG: simultaneous,
individually configured streams in max. resolution at 8.3 fps
Controllable frame rate and bandwidth
VBR/MBR H.264
Image settings Sharpness, Automatic gain control, Exposure zones, Gain,
Rotation, Palette, Isothermal palette, Compression, Mirroring,
Text and image overlay and Privacy masks
Pan/Tilt/Zoom Preset positions, Guard tour, Driver selection, Control queue
Network
Security Password protection, IP address filtering, HTTPSb
encryption,
IEEE 802.1Xb
network access control, Digest authentication, User
access log, Centralized certificate management
Supported
protocols
IPv4/v6, HTTP, HTTPSb
, SSL/TLSb
, QoS Layer 3 DiffServ, FTP,
CIFS/SMB, SMTP, Bonjour, UPnPTM, SNMP v1/v2c/v3(MIB-II),
DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP,
ARP, SOCKS, SSH
System Integration
Application
Programming
Interface
Open API for software integration, including VAPIX®
and AXIS Camera Application Platform; specifications at
www.axis.com
AXIS Video Hosting System (AVHS) with One-Click Connection
ONVIF Profile S and ONVIF Profile G, specification at
www.onvif.org
Analytics AXIS Video Motion Detection 4, active tampering alarm
Support for AXIS Camera Application Platform enabling
installation of third-party applications, see www.axis.com/acap
Event triggers Analytics, Temperature detection (6 alarm zones), Hardware
temperature, Edge storage events, Shock detection, Time
scheduled, Motion Detection, Live Stream Accessed
Event actions File upload: FTP, SFTP, HTTP, HTTPS network share and email
Notification: email, HTTP, HTTPS and TCP
Status LED, Text overlay, SNMP, Pre- and post-alarm video
buffering, Video recording to edge storage, Network share
Guard tour, PTZ preset
Built-in
installation aids
Pixel counter
Data streaming Event data
General
Casing IP66- and NEMA 4X-rated metal casing (aluminium) with
integrated dehumidifying membrane and a germanium window
Color: White NCS S 1002-B. For repainting instructions and
impact on warranty, contact your Axis partner
Memory 256 MB RAM, 128 MB Flash
Power Power over Ethernet IEEE 802.3af/802.3at Type 1 Class 3,
max. 10 W, 8-20 V DC, max. 11 W or 20-24 V AC 50-60 Hz,
max. 15 VA, Power supply not included
Connectors RJ45 10BASE-T/100BASE-TX PoE, Terminal block for power
RS485/RS422 for Pan/Tilt control
Storage SD card slot supporting microSD/microSDHC/microSDXC cards
(card not included).
SD card encryption
Support for recording to network-attached storage (NAS).
For SD card and NAS recommendations, see www.axis.com
Operating
conditions
-40 °C to 60 °C (-40 °F to 140 °F)
Humidity 10-100% RH (condensing)
Approvals Emission and immunity: EN 55022 Class A, EN 50121-4,
EN 55024, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1,
EN 61000-6-2, FCC part 15 Subpart B Class A, ICES-003 Class A,
VCCI Class A, ITE, C-Tick AS/NZS CISPR22 Class A,
KCC KN22 Class A, KN-24
Safety: IEC/EN/UL 60950-1, IEC/EN/UL 60950-22
Environment: EN 50581, IEC 60529 IP66, NEMA 250 Type 4X,
IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-14,
IEC 60068-2-27, IEC 60068-2-30, IEC 60068-2-78
Weight 1.8 kg (4.0 lb)
Included
accessories
Installation Guide, Windows decoder 1-user license,
AVHS Authentication key, AXIS Video Motion Detection 3,
AXIS Connector A 2-pin 5.08 Straight
Torx T20 screw driver, PT Mount Bracket
Optional
accessories
AXIS T8120/T8123-E midspans, Network cable couplers,
AXIS T8129 PoE Extender, AXIS T8604 Media Converter,
AXIS T8640 Ethernet over Coax Adapter PoE+,
AXIS PS24 Mains Adapter, AXIS T8006 PS12 Power Supply,
AXIS T8414 Installation Display
YP3040 Pan-Tilt Motor and wall bracket,
AXIS T91A04/T91A05 Camera Holders,
AXIS T91A50 Telescopic Ceiling Mount (requires AXIS T91A05 Camera Holder),
VT Ceiling bracket ball joint WCM5A,
VT Wall bracket ball joint WBJA,
VT Column mount ball joint WFMCA, AXIS T91A21 Stand
Video
management
software
AXIS Companion, AXIS Camera Station, Video management
software from Axis’ Application Development Partners available
on www.axis.com/support/downloads
Languages English, German, French, Spanish, Italian, Russian, Simplified
Chinese, Japanese, Korean, Portuguese, Traditional Chinese
Warranty Axis 3-year warranty and AXIS Extended Warranty option.
Export control The product contains U.S.-origin controlled
technology/component, the US Export Administration
Regulations (EAR) are always applicable to the product. You
should comply at all times with all applicable national and
international (re-)export control regulations.
a. Individual palette cannot be set per video stream
b. This product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit. (www.openssl.org), and cryptographic software written by Eric
Young (eay@cryptsoft.com).